Pharma

Cleaner production. Audited impact. Same quality.

We measure cleanrooms, water, solvents and the cold chain, turn it into real savings, and deliver the product carbon footprints your buyers and regulators now demand — without ever touching GMP-critical systems.

Cleanroom & utility energy savings

Solvent recovery, water reuse & less waste

Product-level carbon for PSCI, EcoVadis & CSRD

Request a demo

Site · Sustainability

Live

0.42

CO₂ · kgCO₂e/pack

vs. target

−28%

Cleanroom energy

91%

Solvent recovery

47%

Water reuse

99.6%

Cold chain

VOC −31%

GMP data integrity

EcoVadis Gold

Rolling 30d: 0.42 kgCO₂e/pack · Solvent recovery 91% · Water reuse 47% · Cold chain 99.6%

Built for pharma manufacturers and biotech, aligned with

PSCI

EcoVadis

CSRD/ESRS

ISO 14001

The platform

BMS + MES data, turned into action.

We connect read-only to your BMS, EMS, MES and cold-chain systems, define the KPIs that matter (kgCO₂e/pack, energy, water, solvents), and automate alerts, reporting and customer communication.

Sources

BMS/BAS, EMS, MES, LIMS, cold-chain loggers, meters...

Data Quality

Normalization, GxP-aware, ALCOA+ audit trail

KPIs & Alerts

Pharma KPI library, dynamic thresholds

Optimization

HVAC, solvents, water, cold chain, waste

Reporting

CSRD, PSCI/EcoVadis, product carbon footprints

Data & monitoring

Every cleanroom, every litre, every batch.

What we measure, how we integrate, how we act.

Cleanroom & HVAC

• Air changes, differential pressure
• kWh/m², idle setback

Energy & Utilities

• Steam, chillers, compressed air
• WFI & clean utilities

Water & WFI

• Purified water, WFI yield
• Reuse, rejection rate

Solvents & VOCs

• Recovery rate, PMI
• VOC emissions, RTO

Waste

• Hazardous & biohazard
• Single-use plastics, diversion

Cold Chain

• 2–8°C / −20 / −80 ranges
• Excursions, GDP compliance

Emissions

• Scope 1, 2 & 3
• Per-product carbon, F-gases

Effluent

• API-in-water, AMR discharge
• Treatment, monitoring

[DEMO] Cleanroom AHU-12 running full flow during idle shift · Setback suggested · −0.4 tCO₂e/day.

Compatible Sources

BMS / EMS: Siemens, Honeywell, JCI...

MES / LIMS: Körber, Tulip, LabWare...

Protocols: BACnet, Modbus, OPC-UA, MQTT (read-only)

Metrics

KPIs that move the needle.

Clear definitions for operations, ESG and customer communication.

Indicator	Definition	Short Formula	Impact
Carbon per pack	Product carbon footprint	kgCO₂e / pack	Buyers / CSRD
Energy intensity	Energy per unit produced	kWh / unit	Cost & CO₂
Water intensity	Water per unit	L / unit	Stewardship
Solvent recovery	Solvent reclaimed	Recovered / used	Cost & VOC
PMI	Process mass intensity	kg in / kg product	Green chemistry
Hazardous waste	Waste per output	kg / batch	Cost & risk
Cold-chain compliance	Shipments in-range	% in-range	GDP / quality
VOC emissions	Volatile organics released	kg / yr	Permit / health

Operations mode and “customer mode” (per-product, verifiable view).

ISO 14001 · Verified

−28%

Energy

91%

Solvent recovery

0.42

kg/pack

Decarbonisation

Lower impact, batch after batch — proven, not promised.

Build a credible reduction path and back it with audited numbers — cleanroom efficiency, solvent recovery and green chemistry, all on one verified curve toward your science-based target.

✓Cleanroom HVAC optimisation that cuts energy without risking GMP
✓Solvent recovery & green chemistry that lower PMI and cost
✓Renewables & utility efficiency with real payback

ESG & Compliance

ESG that respects your quality systems.

We read GxP data without touching it — sustainability reporting that never compromises GMP or data integrity.

Key Features:

✓CSRD/ESRS, GHG Protocol, EU Taxonomy & SBTi
✓PSCI & EcoVadis supplier disclosures, ready to share
✓Product carbon footprints (NHS net-zero supplier roadmap)
✓GxP-aware: read-only, ALCOA+ audit trail, 21 CFR Part 11 friendly

Frameworks Covered

CSRD/ESRS · GHG Protocol

PSCI · EcoVadis

EU Taxonomy · SBTi

ISO 14001 · ISO 50001 · ISO 14064

Operations

Levers that protect both compliance and margin.

Show daily improvements, savings and risk reduction.

Cleanroom HVAC

Idle setback, air changes.

−15–30% HVAC kWh

Solvent recovery

Reclaim & green chemistry.

Lower PMI & cost

Water & WFI reuse

Recovery & rejection.

−10–25% water

Waste valorisation

Single-use & diversion.

Less to landfill

Cold-chain efficiency

Packaging & routing.

Fewer excursions

Renewables

On-site & PPAs.

Lower Scope 2

Predictive maintenance

Chillers, AHUs, compressors.

Higher uptime

Effluent treatment

API-in-water, AMR.

Lower discharge risk

Portfolio

One standard across every site and line.

Corporate visibility, benchmarking and scalability.

Key Features:

✓Benchmark by site / line / product (kgCO₂e/pack, kWh/unit, PMI)
✓Top-down targets and bottom-up plans with replicable best practices
✓API, formulation, fill-finish and biotech on the same scorecard
✓Unified reporting for Board, customers and auditors

Sites · 4 plants

0.42

Avg kgCO₂e/pack

Live

Madrid · API

0.57

Dublin · Fill

0.38

Singapore

0.44

Boston · Bio

0.29

P&L Impact

Real savings. Lower risk. Contracts kept.

Clear numbers — energy, solvents, water and supplier compliance.

Energy

−15–30% HVAC

Solvents

Recovered & reused

Water

−10–25%

Compliance

PSCI / EcoVadis

Revenue

Keep key contracts

Illustrative Business Case

Scenario: Mid-size manufacturing site

• Cleanroom HVAC: 18 GWh/yr

• Idle setback −20% ⇒ 3.6 GWh/yr

• Energy saved: €540,000/year at €0.15/kWh

• CO₂ avoided: ~900 tCO₂e

Payback ≈ 10 months

Cleanroom ROI Calculator

Cleanroom energy (GWh/yr)

HVAC saving target

Annual Savings

€540,000

Payback: 10 months | tCO₂e avoided: ~900

Reporting

The product carbon data your buyers now demand.

Show results to customers, auditors and health systems — with verifiable data.

Key Features:

✓Per-product carbon footprints (PCF) for tenders and health systems
✓PSCI & EcoVadis scorecards and CSRD reports, audit-ready
✓Supplier & site leaderboards to drive a sustainability culture
✓Export to PDF/Excel and partner-ready data packs

Product · Carbon passport

0.42

kg CO₂

91%

Solvent recovery

Eco-grade

PSCI audited · 2025

View product PCF

Integrations

We connect to your BMS, MES and LIMS.

Seamless, read-only fit with your validated stack.

BMS/EMS: Siemens, Honeywell, JCI... MES/LIMS: Körber, Tulip, LabWare... Cold chain: IoT loggers, GDP platforms... Metering: energy, water, steam... Back-office: EAM/CMMS, ERP, SSO...

Open API, webhooks, queues/retries, schema validation, time-series DB, configurable data retention.